Clutch Switch

This one's almost too easy. All that is needed is to loop a small tie wrap around the clutch switch and switch lever assembly. After cinching it down the switch lever is permanently depressed (thereby eliminating the annoying clicking sound). If it ever becomes necessary to restore the switch to normal operation just cut the tie wrap. Couldn't be simpler. Depending on how long it takes you to find a tie wrap the entire process should take 2 minutes or less.

NOTE: It is now possible to start the car without the clutch being depressed. If you do this hack make sure the car is not in gear when the car is started unless the clutch is depressed.